1. Difference between VLAN only and creating new network
I think of it like "vlan only" only creates the vlans on all unifi devices, while making a network will apply an ip address on the USG and (optionally) run a ...
Loading Ubiquiti Community
2. Help Understanding VLAN Only Setting - Ubiquiti Community
Typically use VLAN Only when there is another router than your UDM that will be on it. Basically tells the UDM “hands off, another router has this VLAN covered” ...
Loading Ubiquiti Community
3. VLAN only and Wireless Network | Ubiquiti Community
VLAN only network has no DHCP etc so nothing connected will have any connectivity with your setup. I understand you are looking to be more secure, ...
Loading Ubiquiti Community
4. VLAN-Only Network in the New Interface/Classic Settings Question
VLAN Only networks are listed as Network Isolation under Advanced Features. ... UniFi Switches with VLAN's. If you have a USG, and that is your gateway ...
Loading Ubiquiti Community
5. difference between coporate and vlan only - Ubiquiti Community
VLAN only is like connecting a device to a switch with no router, gateway, DNS or DHCP server. You'll have to assign static IP addresses or connect another DHCP ...
Loading Ubiquiti Community
6. Purpose --> whats the difference between Corporate, Guest, VLAN
VLAN only will remove any subnet options and can be used to define VLANs for pure VLAN tagging purposes by unifi switches (however any network created can be ...
Loading Ubiquiti Community
7. pfSense / UniFi: "VLAN only" works, but "Corporate" works as well
Dec 6, 2020 · The rationale is that UniFi “corporate” networks automatically configure DHCP server, which of course is not required anymore now that DHCP is ...
Hey guys, just wondering about this little experiment I did. I’m in a transitioning phase where I am replacing my USG with a pfSense box. Gradually. I am still alternating between the USG and pfSense to learn how to set things up. Also, I am trying to set things up in a way that I can hot swap between the USG and pfSense. Normally, in a fully functioning all-UniFi network (USG / US / AP), when replacing a USG by a pfSense router, one needs to set up VLANs on the UniFi controller as “VLAN only”...
8. Why Can't I Change "VLAN Only" Network To "Corporate" In Unifi ...
It's not creating a network but just makes that ID known inside UniFi, so you could not use a corporate network with that VLAN-ID instead to achieve the same ...
Loading Ubiquiti Community
9. UniFi - Using UniFi Switch to pass external VLANs - HostiFi Help Center
In this example, our ISP will be handing off our connection as fibre, with an SFP. · Next, go to 'Networks' · Click on 'Create New Network' · Next, click on the ' ...
Use VLANs with a UniFi Switch as a media converter
