- Manuals
- Brands
- Craftsman Manuals
- Trimmer
- WEEDWACKER 358.791570
- Instruction manual
25cc/1.5 cu.in. 2-cycle 17 inch cutting path / 0.080 inch line gasoline weedwacker
Hide thumbs
-
- Contents
- Table of Contents
- Troubleshooting
- Bookmarks
Advertisem*nt
Available languages
- EN
Available languages
- ENGLISH, page 1
Table of Contents
- 1 Operator Safety
- 2 Unit Maintenance
- 3 Fuel Safety
- 4 On/Off Switch
- 5 Primer Bulb
- 6 Start Lever
- 7 Before Starting Engine
- 8 Starting a Flooded Engine
- 9 Maintenance
- 10 Troubleshooting
- 11 Warranty
- 12 Transporte y Almacenamiento
- 13 Aviso de Seguridad
- Download this manual
Enlarged version
Instruction Manual
25cc/1.5 cu.in. 2-Cycle
17 Inch Cutting Path / 0.080 Inch Line
GASOLINE
WEEDWACKER
®
Model No.
358.791570
•
Safety
• Assembly
•
Operation
•
Maintenance
•
Parts List
•
Espa_ol
For Occasional
Use Only
WARNING:
Read and follow all Safety
Rules and Operating
Instructions
before first use of this product.
For answers
to your questions
about this product:
Call 7 am-7
pm, Mon.-Sat.,
or 10 am-7
pm, Sun.
1-800-235-5878
(Hours
,,sted
are C entral
Time)
Sears, Roebuck
and Co., Hoffman
Estates,
IL 60179 U.S.A.
530164368
12/9/03
Table ofContents
Advertisem*nt
Table of Contents
Related Manuals for Craftsman WEEDWACKER 358.791570
-
Trimmer Craftsman WEEDWACKER 358.791530 Instruction Manual
25cc/1.5 cu.in. 2-cycle 17 inch cutting path / 0.080 inch line gasoline weedwacker (29 pages)
-
Trimmer CRAFTSMAN WEEDWACKER 358.791590 Instruction Manual
25cc/1.5 cu.in. 2-cycle 17 inch cutting path/0.095 inch line gasoline weedwacker (40 pages)
-
Trimmer CRAFTSMAN WEEDWACKER 358.791520 Instruction Manual
25cc/1.5 cu.in. 2-cycle 17 inch cutting path / 0.080 in. line gasoline weedwacker (14 pages)
-
Trimmer Craftsman GASOLINE WEEDWACKER 358.791520 Instruction Manual
17 inch cutting path/0.080 in. line (33 pages)
-
Trimmer CRAFTSMAN WEEDWACKER 358.791510 Instruction Manual
32cc/1.9 cu.in. 2-cycle gasoline weedwacker (29 pages)
-
Trimmer CRAFTSMAN WEEDWACKER 358.791580 Instruction Manual
32cc/1.9 cu.in. 2-cycle gasoline weedwacker (30 pages)
-
Trimmer CRAFTSMAN WEEDWACKER 358.791540 Instruction Manual
25cc/1.5 cu.in. 2-cycle 17 inch cutting path / 0.080 inch line gasoline weedwacker (29 pages)
-
Trimmer CRAFTSMAN WEEDWACKER 358.791560 Instruction Manual
25cc/1.5 cu.in. 2-cycle 16 inch cutting path / 0.080 inch line gasoline weedwacker (13 pages)
-
Trimmer CRAFTSMAN GASOLINE WEEDWACKER 358.791031 Operator's Manual
25cc/1.5 cu.in. 2-cycle 17 inch cutting path / 0.080 inch line (45 pages)
-
Trimmer CRAFTSMAN WEEDWACKER 358.791140 Operator's Manual
33cc/2.0 cu.in. 2-cycle gasoline weedwacker (46 pages)
-
Trimmer CRAFTSMAN Weedwacker 358.791980 Operator's Manual
28cc/1.7 cu.in. 2-cycle gasoline weedwacker (19 pages)
-
Trimmer CRAFTSMAN WEEDWACKER 358.791072 Operator's Manual
32cc/1.9 cu.in. 2-cycle gasoline weedwacker (22 pages)
-
Trimmer CRAFTSMAN WEEDWACKER 358.791032 Operator's Manual
25cc/1.5 cu.in. 2-cycle 17 inch cutting path / 0.080 inch line gasoline weedwacker (23 pages)
-
Trimmer CRAFTSMAN WEEDWACKER 358.791010 Operator's Manual
25cc/1.5 cu.in. 2-cycle 17 inch cutting path / 0.080 in. line gasoline weedwacker (29 pages)
-
Trimmer CRAFTSMAN Weedwacker 358.791620 Operator's Manual
Weedwacker gas trimmer 20cc/1.2 cu.in. 2-cycle 15 inch cutting path / 0.080 in. line (18 pages)
-
Trimmer CRAFTSMAN WEEDWACKER 358.791060 Operator's Manual
32cc/1.9 cu.in. 2-cycle 17 inch cutting path/0.080 inch line gasoline weedwacker (39 pages)
Summary of Contents for Craftsman WEEDWACKER 358.791570
- Page 1 Instruction Manual 25cc/1.5 cu.in. 2-Cycle 17 Inch Cutting Path / 0.080 Inch Line GASOLINE WEEDWACKER ® Model No. 358.791570 • Safety • Assembly • Operation • Maintenance • Parts List • Espa_ol For Occasional Use Only WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product.
- Page 2 Parts and Ordering Back FULL ONE YEAR WARRANTY ON CRAFTSMAN ® GAS POWERED WEEDWACKER ® LINE TRIMMER For one year from the date of purchase, when this Craftsman Gas Powered Weedwacker Line Trimmer is maintained, lubricated, and tuned up according...
-
Page 3: Operator Safety
• Use only for jobs explained in this • Use only 0.080 inch (2 mm) diame- manual. ter Craftsman® brand line. Never TRANSPORTING AND STORAGE use wire, rope, string, etc. • Install required shield properly •... - Page 4 • Store unit and fuel in area where ers who operate power tools on a con- fuel vapors cannot reach sparks or tinual and regular basis must monitor open flames from water heaters, closely their physical condition the condition of this tool. electric motors or switches, fur- naces, etc.
-
Page 5: On/Off Switch
For proper onentation of shield, see KNOW YOUR TRIMMER illustration in OP- ERATION section. Slot Bracket _/&._ _ 1. Remove wing nut from shield. --'_'_._/ Wing Nut Insert bracket into slot as shown. Pivot shield until bolt passes through hole in bracket. Securely tighten wing nut onto bolt. - Page 6 We recommend Craftsman brand STARTING A COLD ENGINE synthetic oil. M ix gasoline and oilata NOTE: DO NOT squeeze the throttle ratio of40:1. A40:1 ratio isobtained trigger until the engine has started and bymixing 3 .2 ounces ofoilwith 1 runs.
-
Page 7: Starting A Flooded Engine
STARTING A FLOODED ENGINE TWIST AND EDGE The Twist and Edge feature allows for Flooded engines can be started by easy edging of sidewalks, patios, placing the ON/OFF switch in the ON driveways, etc. position and pulling the starter handle 1. - Page 8 • The line wil! easily remove grass Mowing and weeds from around walls, fences, trees and flower beds, but it also can cut the tender bark of trees or shrubs and scar fences. To help avoid damage especially to delicate vegetation or trees with tender bark, shorten...
-
Page 9: Maintenance
MAINTENANCE SCHEDULE _kWARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments. CARE & MAINTENANCE TASK WHEN TO PERFORM Before each use Check for Ioose fasteners and parts Before each use Check for damaged or worn parts After each use Inspect and clean unit and Iabels Clean air filter Every 5 hours of operation... - Page 10 1. Cut a length of 25 feet of 0.080 inch lowing conditions: (2 ram) diameter round Craftsman • Engine will not idle when the throtfie is brand line. released. Make adjustments...
- Page 11 Run engine at least 5 min- reach sparks or open flames from utes after adding stabilizer. water heaters, electric motors or Craftsman 40:1,2-cycle engine oil (air switches, furnaces, etc. cooled) is already blended with fuel •...
-
Page 12: Troubleshooting
TROUBLESHOOTING TABLE _lk WARNING: Always stop unit and disconnect spark plug before perform- ing all of the recommended remedies below except remedies that require operation of the unit. CAUSE REMEDY TROUBLE I. Move ON/OFF switch to ON. Engine will not 1.Engine ON/OFF switch start. - Page 13 orworkmanship ofthe engine causes uled only for regular inspection to the the failure ofsuch a nemission related effect of "repair or replace as neces- part, the part will b erepaired orre- sary" shaII be warranted for 2 years. placed bySears. OWNER'S WAR- Any warranted part which is scheduled PANTY RESPONSIBILITIES:...
- Page 14 DE UN AI_IO COMPLETO PARA LA CORTADORA DE LINEA A GASOLINA WEEDWACKER ® DE CRAFTSMAN ® Durante un a_o, a partir de la fecha de compra, siempre que se haga el manten- imiento, la lubricaciTn y los ajustes a esta Cortadora...
- Page 15 Evite Ia linea girante. • Use exclusivamente los accesorios y • Mantenga el cabello por encima repuestos Craftsman recomendados. los hombros, at_ndolo para tal efecto • Todo servicio y mantenimiento si es necesario. No use ropa suelta explicado...
-
Page 16: Transporte Y Almacenamiento
• Pare e lmotor ypermita que seenfrie AVISO DE SEGURIDAD: El estar ex- elaparato antes d eretirar latapa del puesta a las vibraciones a trav6s det tanque. uso prolongado de herramientas • Almac_ne siempre combustible fuerza a gasolina puede causar dafios a unrecipiente aprobado para los... - Page 17 CONTENICO DE LA CAJA AVISO: La perilla de ajuste deber& Use la siguiente lista para verificar ser instalada en el lado izquierdo de el todas la piezas hayan side incluidas: aparato como se muestra en el ilustra- Modelo 358.791570 ClOn. •...
- Page 18 Recomendamos el aceite de sint6tico seguridad antes de comenzar. Si no de la marca Craftsman. Mezcle la comprende las reglas de seguridad, gasolina con ei aceite en la proporci6n no intente abastecer eI aparato de combustible.
- Page 19 combustible. NO USE a ceite para AVISO: Aseg_rese que la linea de la autom6viles nipara b arcas. Estos cabezal de corte est_ extendida aceites dafiar_n eImotor. aproximadamente 8 a 10 cm (3 a 4 AImezclar elcombustible, siga las pulgadas) antes de que arranque instrucciones impresas enelrecipiente.
- Page 20 3. Tire firmemente del m ango dela bros sean arrojados en direcci6n cuerda dearranque hasta q ue el contraria a donde estA parado. Sin motor seponga enmarcha. tenet que inclinarse, mantenga AVISO: NormaImente, elprocedimiento linea cerca del suelo y paralela al para a rrancar con elmotor caliente mismo, sin meterla dentro del materi-...
- Page 21 demateriales tales c omo a lambre, hilo, matedal a cortar. No meta la linea den- soga, etc. E l a lambre puede romperse tro del &rea que se est_ cortando. durante elcorte y convertirse enunmisil peligroso Ioque puede causar lesiones Para Recortar deseda g ravedad.
- Page 22 Para Bordear PARA BORDEAR - Ajuste eI aparato a la posici6n del bordeando (vea la secci6n TWIST AND EDGE). Mientras se encuentre bordeando, permita que sea la punta de la linea la que haga el contacto con el material a bordear. No fuerce la linea.
- Page 23 • Retire el aro que guia Ia linea y la de seria gravedad. bobina. 1. Corte una Iongitud de 8 metros (25 Aro que gufa la linea pies) de linea redonda de 2 mm (0,080 de pulgada) de di_metro Ia marca Craftsman.
- Page 24 AJUSTE AL CARBURADOR Introduzca la _ADVERTENCIA: Mantenga linea en la di- I#1/_,'_" recoJ6nque se (_ (_/_))_j otras personas alejadas de la zona en muestra en la donde se encuentre haciendo ajustes bobJna _X_yy/ de marcha lent& El cabezal de corte se mantendr_ girando durante este...
- Page 25 5 minutos despu_s de haberle puesto estabilizador. mas abiertas provenientes de clenta- dores de agua, motores o interrup- El aceite Craftsman 40:1 para motores tores el_ctricos, calefactores a 2 tiempos (enfriados a aire) viene...
- Page 26 TABLA DIAGNOSTICA ADVERTENCIA: Siempre apague el aparato y desconecte la bujia antes de hacer cualquiera de las reparaciones recomendadas a continuaci6n )eraci6n. norequieran quela unidad est6 en o CAUSA SINTOMA SOLUCION El motor no I. El interruptor ON/OFF esta 1. Coloque el interruptor ON/OFF a la...
- Page 27 SUS DERECHOS Y OBLIGACIONES si su m_quina de motor pequeSo para DE GARANTIA: La Agencia de Pro- uso fuera de carretera o alguna pieza tecci6n Ambienta! de los Estados Uni- de la misma ha dejado de funcionar dos y Sears, Roebuck and Co., debido al abuso, negligencia, manten-...
- Page 28 plazo p rogramado para dicha p ieza. trar en contacto con su distribuidor DIAGNOSTICO: No sedeber& cobrar autorizado del servicio Sears m_s cer- aldueSo ningt_n tipo decargos por I a cano o Ilamar a Sears al labor dediagn6stico lacua! determine 1-800-469-4663.
